1. Missed the live Ask the Expert event?
    Catch up on the conversation about fertilization strategies for success with the experts at Koch Turf & Ornamental in the Fertilizer Application forum.

    Dismiss Notice

John Deere 727A Dimensions

Discussion in 'Lawn Mowing' started by Jeff Voorhies, Sep 23, 2006.

  1. Jeff Voorhies

    Jeff Voorhies LawnSite Member
    Messages: 19


    Will be purchasing a 727A in the near future. I was wondering how wide these machines are with the discharge flap in the up position. My storage doors are 60 inches wide. Will it fit? The Deere website does not give dimensions with flap up only flap down and my dealership would have to measure one but have none in stock right now. Thanks
  2. Envy Lawn Service

    Envy Lawn Service LawnSite Fanatic
    Messages: 11,087

    Yeah it should... that's the 54" right?

    Should run right around 55" or 56" with the chute up I'd think.
    Some guys here own them and could measure for you though.
  3. traman

    traman LawnSite Senior Member
    Messages: 712

    Wheel Base 1.22 m (48 in.)

    Overall Height 1.82 m (71 in.)

    Overall Length 1.98 m (78 in.)

    Weight (717A) 513 kg (1132 lb)

    Weight (727A) 524 kg (1155 lb)

    Overall Width (717A 48-Inch Deck)
    Chute Up 1.34 m (53 in.)

    Chute Down 1.61 m (63.5 in.)

    Overall Width (727A 54-Inch Deck)
    Chute Up 1.52 m (60 in.)

    Chute Down 1.79 m (70.5 in.)
  4. Power Chute Design

    Power Chute Design LawnSite Senior Member
    Messages: 322

    When I have my chute up and can just make a 60" gate with about one inch on either side.
  5. par69

    par69 LawnSite Member
    Messages: 50

Share This Page