just a little help

Discussion in 'Landscape Architecture and Design' started by Commonwealth LC, Jun 21, 2005.

  1. Commonwealth LC

    Commonwealth LC LawnSite Member
    Messages: 51

    what edging would i need to reinforce a walkway and where could i get it.. all i ever see is plastic for beds or wood, but i dont know if the wood would be right bc the walkway is going to be curvy, thanks.!
  2. MarcusLndscp

    MarcusLndscp LawnSite Senior Member
    Messages: 634

    Is it a paver walkway? If it is, I always use snapedge. It's the easiest to work with, you can use it on straight edges of pavers or you can cut the plastic piece in the middle to bend it for curved areas. You can buy it anywhere that sells pavers. And don't forget your spikes too. There are other products out there this is just the product I have been happiest with
  3. MarcusLndscp

    MarcusLndscp LawnSite Senior Member
    Messages: 634

    Oooops, one day later I read your previous thread saying it was gravel sorry for the oversight :rolleyes:
  4. sheshovel

    sheshovel LawnSite Fanatic
    Messages: 5,112

    look at the flagstone walkway or stone pathway thread.

Share This Page