Kawi fx idle problem

Discussion in 'Mechanic and Repair' started by AL's, Nov 12, 2017.

  1. AL's

    AL's LawnSite Senior Member
    Messages: 750

    Rpm started going up and down. Seem to only do when blade are not engaged. Smooths out while cutting. I dont know the actual rpm's but as an example its like 500rpm for a few seconds then 1000rpm then 500 then 1000 back and fourth. Hope its an easy fix.
     
  2. ricky86

    ricky86 LawnSite Silver Member
    Messages: 2,092

    One thing to check is, make sure the welch plugs are in the top of the carb body. If one is missing, it'll give a surge. Under load, it's pulling more off the main.
     
  3. BigFish

    BigFish LawnSite Platinum Member
    Messages: 4,121

    I might add : or loose.
    You can seal 'em up with a bit of epoxy. (Sparingly )
     
  4. xxl

    xxl LawnSite Senior Member
    from MO
    Messages: 251

    What about the govenor did you check that
     

Share This Page