Kohler 15 HP Oil Filter Wrench

Discussion in 'Hustler Turf Equip (Archived)' started by Fooltergeist, Aug 22, 2005.

  1. Fooltergeist

    Fooltergeist LawnSite Member
    Messages: 11

    I'm having some difficulty unscrewing the oil filter on the Kohler Courage 15 HP engine on my Mini Fastrak because there is not enough room for my hand to manually turn the filter. Is there an oil filter wrench at the auto supply store that would fit? I hate driving to my Hustler dealer 22 miles away for such a simple problem. Thanks for any tips.
  2. Mickhippy

    Mickhippy LawnSite Platinum Member
    Messages: 4,275

    I have absolutly no idea where your "oil" filter is but was told to push a screw driver through the filter then loosen useing the screw driver as leverage. May make a mess but at least you dont need a special wrench for it.
    I havent had a need to do it myself but thought I'd pass that on!
  3. wushaw

    wushaw LawnSite Member
    Messages: 61

    I used oil filter pliers on my MFT. Wally world carrys a cheap brand.
  4. mike28nc

    mike28nc LawnSite Member
    Messages: 71

    something I have used in the past. I take a small strip of a shop rag and tie it tight around the filter. Then I put the screw driver btwn the rag and filter. Give it one turn around to tighten up the rag to oil filter. then turn.

Share This Page