Separate names with a comma.
Missed the live Ask the Expert event?
Catch up on the conversation with Ken Hutcheson, President of U.S. Lawns, in the Franchising forum.
Discussion in 'Lawn Mowing' started by smithbro1, Nov 8, 2003.
Can anyone tell me how to stop the blowout on my lazer with the ultra vac.
Anti-blowout baffle available through Exmark. Depending on how knowlegable your dealer is, you may have to convince them that it exists.
if you have a 4 foot laser hp,dont bother they dont make a baffle
ya 52 or larger only.
it's just a piece a metal that lowers the front of the baffel, like 1/2'' on the left and center blades. all for $33.
hey but it works.
or try the cheap black plastic lawn edgeing (sp ?) on the front right hand side,drill in to the deck with 3/4 in stainles steel self tapping screws but leave enough room so it dosent push the leaves
What ya see, is what ya get.
Lets you suck up leaves off of driveways with deck set at 3 1/4"!!!
Help me understand something. Exmark realizes there is enough of a problem with blowout to make an accessory available to stop it. So why didn't they just go ahead and start making the baffles deeper to start with in later model years???
Does adding the blowout baffle have a negative effect on performance of the deck in some other aspect or something???