Lazer HP handles

Discussion in 'eXmark' started by jwscar, Jul 8, 2004.

  1. jwscar

    jwscar LawnSite Member
    Messages: 6

    I need to know what the spec is for the handles are when they are folded inward for running. Looked at 3 and all 3 had a diffence one was 3" ,one 2" and one 1/4" when the handles where together to run need to know plan on buying one soon. And do not want to start out with a problem.
  2. eXmark

    eXmark Manufacturer / Sponsor
    Messages: 4,258


    I don't know that there is a real tight tolerance on this handles. Different operators prefer different widths. Also the mounting of the drive levers in the top vs the bottom location can cause some variences. I've also seen them pretty tight when new and requiring a good nudge to get them all the way inward. Most of the time you'll see them at 2" or less. I must confess I've never seen one at 3" though.



Share This Page