Lazer HP pto wont engage

Discussion in 'Mechanic and Repair' started by 12Valve, Aug 13, 2010.

  1. 12Valve

    12Valve LawnSite Member
    from NC
    Messages: 115

    Got off traler and went to mow, pulled pto switch......mower started to bog down a little like normal (all in a split second) then stopped. Thought I had threw a belt but I didn't.

    It will only make a faint clicking sound when I try to enguage.......Found a little stick wedged under the belt.....doesn't look like it has damaged any wires.....(or I guess it has???) THe plug is tight on the pto, all fuses I checked were fine and pushed in good...........

    It will also make the clicking sound with the park brake up..........what should I start looking at???????/for???
  2. Ruben Rocha

    Ruben Rocha LawnSite Senior Member
    Messages: 577

    First thing to check is are you getting 12volts to the clutch. With a meter

Share This Page