Lawn Care Forum banner
1 - 3 of 3 Posts

· Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
I just started up my exmark lazer z 60" for the first time since winter. After I got it started it has very little power. I have changed the fuel filter, air filter, gas, spark plugs, oil and oil filter. It seems like the engine is getting too much air or not enough fuel, because the brand new spark plugs are already carboned up. Does anyone have any suggestions?

Thanks,
Woody
 

· Registered
Joined
·
445 Posts
Welcome to LawnSite.Model and serial #'s will get you some better answers. Do you have a little black smoke from exhaust ? Are both plugs getting blackened ? Could be a carb issue. Float may be sticking. Choke may be stuck or not opening fully. Send #'s for engine as well .Make,model, and hp. Thanks.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top