1. Missed the live Ask the Expert event?
    Catch up on the conversation about fertilization strategies for success with the experts at Koch Turf & Ornamental in the Fertilizer Application forum .

    Dismiss Notice

Leaf collection

Discussion in 'Lawn Mowing' started by lotsoflights, Nov 1, 2004.

  1. lotsoflights

    lotsoflights LawnSite Member
    Messages: 1

    I was looking to see if anyone had plans on their boxed for leaf collection. I have F550 and was looking build abox for the back. I was looking for any good tips that you all might have. Things to do and things to stay away from... :cool2: :help:

  2. Greybeard

    Greybeard LawnSite Member
    Messages: 132

    I just built one. Actually, I extended the sides to make a body 6' high. (First I asked the welding shop for a price for a sheet metal one. He laughed. Said $4-5 thousand. Double last year's price, because steel is so high.)
    Anyway, he gave me some tips: keep the inside smooth - all the supports on the outside, it will dump better.

    The more vent area the better. I used a full open top covered by a mesh tarp. It seems to work great, and not throw as much dust as small vents. I cross-braced everything because of the open top.

    My dump bed is a 14 foot landscaper body, with two sections of fold-down sides each side. I cut plywood down to 7 feet, then glued and screwed 2x3 around the edges, except where they butt together. There I left each 2x3 about 3 1/2 inches short, and ran a 2x8 vertical to cover the seam. everything is bolted through.

    For the tailgate I got 3/4 pipe, screwed into floor flanges on each side, then hung a plywood door sandwiched between 2x3 lumber, and attached with pipe clamps. It swings from the top, and hangs a few inches inside the tailgate, which is a lightweight.

    The whole thing will unbolt and stack flat in 6 pieces at the end of the season. The loader is a 16 horse Kohler Giant Vac. I was lucky to find one with the extra-long swing away trailer hitch mount. Just clears the dump.

    I just noticed - you're right down the road. If you'd like to see the rig, send me a pm. I'm not far from Route 91. And if you need help with curbside leaf pickup, my truck holds 21 yards.

    Sorry about the long post. If I get some time, and I can figure it out, I'll try to post a pic or two. Good luck with the project.

Share This Page