Ledgestone veneer over stucco

Discussion in 'Hardscaping' started by Ocutter73, Aug 27, 2009.

  1. Ocutter73

    Ocutter73 LawnSite Member
    from nj
    Messages: 58

    A client has asked me to bid on an area around his front door entrance. He presently has stucco. I was going to attach metal lathe to the stucco and use a scratch coat for support. Heres my question. Would Using the EP Henry Ledgestone stackstone be ok for outdoors. I read that this may not be usable in the freeze-thaw areas. What else would you use/do to prep the stucco? thanks
  2. Hardscaping1

    Hardscaping1 LawnSite Member
    Messages: 11

    EP Henry’s Ledgestone is suitable for both exterior and interior applications in all climates and, in fact, is more commonly found in exterior uses. Metal lath is recommended for use under the scratch coat. I have attached several images. If you would like to discuss installation details for your specific application, please contact EP Henry and ask for Hardscaping™ Construction Technical Information.



    Cast Veneer Stone Ledgestone dry stack entrance.jpg
  3. 2low4NH

    2low4NH LawnSite Bronze Member
    from NH
    Messages: 1,890

    you gotta find out whats under the stucco you should have 2" foam board under it.

Share This Page