Lesco 54" ZTR Cuts like Crap

Discussion in 'Landscape Architecture and Design' started by Fartman61, Sep 5, 2006.

  1. Fartman61

    Fartman61 LawnSite Member
    Messages: 2

    If anyone has any suggestions , this thing just seems to not cut very good anymore. It's leaving rows of uncut grass every pass , I shoulden't have to double cut every lawn no matter how tall or short it is, or should I ? I have never had the deck adjusted and I'm wondering if it's that , I have tried new high lift blades ,gator blades ect...
    Any help would be great
  2. zemog

    zemog LawnSite Member
    Messages: 19

    i think u hit the nail on the head......just adjusted my toro 52 for the same thing......your mower probably also dives alittle on the side thats low.
  3. dcondon

    dcondon LawnSite Silver Member
    Messages: 2,246

    Yup, try this and see if it helps. Also try a pair of new low lifts.... Our 72" will do the same thing with highs.:waving:
  4. yrdandgardenhandyman

    yrdandgardenhandyman LawnSite Senior Member
    from midwest
    Messages: 953

    Mine was doing that too. Releveled the deck, and it's back to the pro cut again.:)
  5. DynaMow

    DynaMow LawnSite Senior Member
    Messages: 570

    when you say you "releveled the deck" what exactly do you mean? What is the process? Are you just talking about floating, adjustable decks?

Share This Page