1. Missed the live Ask the Expert event?
    Catch up on the conversation with Ken Hutcheson, President of U.S. Lawns, in the Franchising forum.

    Dismiss Notice

Lesco ztwo not starting

Discussion in 'Mechanic and Repair' started by Turf Technologies, Dec 14, 2005.

  1. Turf Technologies

    Turf Technologies LawnSite Senior Member
    from Florida
    Messages: 587

    I have a Lesco Ztwo with a 25 Kaw on it, well I started it up to change the oil and everything was fine, moved it to my spot shut it down , did the job. Then got on it and turn the key, nothing. So I tried starting it from the cylonide and it would start, but now I cant even get it to start that way, any ideas?
  2. Restrorob

    Restrorob LawnSite Fanatic
    Messages: 11,029

    If it started by jumping the solenoid and now it wont do that, I would suggest checking battery cable connections and battery condition. If thats fine I would look closer at the starter its self, Make sure you are getting voltage to the large pos. post then check for voltage on the small spade connector on the solenoid when the key is put in the start position.

Share This Page