1. Can’t make it to the GIE+EXPO 2017?
    LawnSite brings the trade show floor to your fingertips with our new GIE+EXPO 2017 Sneak Peek video series debuting now in the Lawn Mowing forum.

    Dismiss Notice

Liquid binder advice

Discussion in 'Hardscaping' started by shovelracer, Apr 7, 2013.

  1. shovelracer

    shovelracer LawnSite Silver Member
    Messages: 2,008

    Not hardscaping, but this is probably my best chance for an answer. My family belongs to an RC racing club. I help them with the track. The track is basically baseball diamond clay. Supposed to be a 80/20 clay/sand mix. The issue is that the cars bring up the sand and it requires a ton of maintenance. We were discussing ways to lock the material a little better to reduce the surface loosening. We discussed mixing in lime and even heard that a competing track was using coca cola. We started discussing chemical binders, but were not real sure how it would work out. Does anyone have any ideas of possible products that might be beneficial? The track is exposed outdoors.
     
  2. jbailey52

    jbailey52 LawnSite Bronze Member
    Messages: 1,094

    Im a Pepsi guy, so I cant help you there..... Don't know the name of it, but there is a product they use on the infield fill when it is wet.... I kind of binds the particles together, that may be the answer.
     
  3. TX Easymoney

    TX Easymoney LawnSite Platinum Member
    Messages: 4,082

  4. PaperCutter

    PaperCutter LawnSite Bronze Member
    Messages: 1,996

Share This Page