Looking for conduit fitting in a previous post

Discussion in 'Landscape Lighting' started by EBHC, Oct 26, 2008.

  1. EBHC

    EBHC LawnSite Member
    Messages: 49

    I have searched & searched. Sometime back somebody had found this simple conduit fitting for entering into walls. It attached to the end of the pipe and covered the hole in the wall. 2 screws held it in place. Simple & cheap.
    Anybody know were to get them or find the post?
    Thanks in advance!
  2. S&MLL

    S&MLL LawnSite Senior Member
    Messages: 751

    Have you looked in lowes or home depot or supply house. I use them all the time. Either 3/4" or 1/2".



    Your best bet is to become familiar with conduit and the fitting and everything else. I tend to use alot of it. I know on my install truck keep a whole bunch of 1/2 and 3/4" scd.40 fitting on hand.
  3. EBHC

    EBHC LawnSite Member
    Messages: 49

    Thanks but no cigar. I've used those fittings plenty. The fitting was not a box. It was somewhat like half a shell that would cover the hole in the wall, glue to the end of the pipe and 2 screws held the "shell" to the wall. It may have been on the irrigation forum.
    Thanks !
  4. Venturewest

    Venturewest LawnSite Senior Member
    Messages: 515

    I know exactly what you mean. I get them at my local irrigation supply. I searched their website and can't find it. They are really handy. If I run across them I will post.
  5. EBHC

    EBHC LawnSite Member
    Messages: 49

    Venturewest, thanks in advance! Hope you can find it.

Share This Page