1. Missed the live Ask the Expert event?
    Catch up on the conversation about fertilization strategies for success with the experts at Koch Turf & Ornamental in the Fertilizer Application forum.

    Dismiss Notice

Looking for paver stone lights

Discussion in 'Landscape Lighting' started by Zohan, Jul 14, 2012.

  1. S&MLL

    S&MLL LawnSite Senior Member
    Messages: 751

    And what i would do is drill through the concrete base. That way you can put your connection down there.
    Posted via Mobile Device
  2. Zohan

    Zohan LawnSite Member
    Messages: 136

    Ahhhh....i see....thanks for the good info...
    When u get a chance please link to those pics, thx
  3. Zohan

    Zohan LawnSite Member
    Messages: 136

    Ok, now im hooked. Im looking at these core drills and bits.
    Do you run dry or wet?
    I can get a bit set to use with my sds and spline drills which i already have ( i can turn off hammer function so they only drill)....
    What is typical depth of bits for drilling paver stones?
    Any other tips?
  4. S&MLL

    S&MLL LawnSite Senior Member
    Messages: 751

    I only run wet.... No reason to use up bits. I use 18 inch bits but that's because I also core holes in foundations for hvac ec's and plumbers.

    Go on the aolp forum and find my post with the link to all the pics....

    There is a website that sells adapters to use on Sds chucks to convert to universal core bit.... I would of done it because hilti bits are so expensive but now they retip my bits for 70dollars

Share This Page