Discussion in 'Mechanic and Repair' started by perky99, Aug 18, 2007.

  1. perky99

    perky99 LawnSite Member
    Messages: 33

    On a TVM220-157106G, I replaced rings, after honing cyclinder,valves, lapped. put it back together, torquing per spec,s. Now the starter won,t turn over to get a compression reading.
    Before I tore it down it turned over fine ,run pretty good

    Had low compression, no crankcase vacumn, very black compression chamber, intake valve, and exhaust,leaking oil from breather

    My question now is could the mechanical compression release be installed incorrectly?
    Don,t have the info on how to install it, all the manual tells you is what it does.

    I feel I got a hot battery
    I,d really like to know where I can get a good ho to book and a parts break down on tecumseh engines

Share This Page