mower trap

Discussion in 'Original Pictures Forum' started by Toy2, Jun 22, 2008.

  1. Toy2

    Toy2 LawnSite Bronze Member
    Messages: 1,924

    I got tired of having to strap my trimmer to the mower when traveling down the street, so I made this:

    pic 1.JPG

    pic 2.JPG
  2. freshprince94

    freshprince94 LawnSite Bronze Member
    Messages: 1,449

    Sweet! What mower?
  3. Toy2

    Toy2 LawnSite Bronze Member
    Messages: 1,924

    Thanks, Toro WB 36''. I mow a couple lawns down the street, got tired of strapping the blower and trimmer with bunge cords. I'm trying to come up with something for my blower.

    Hook up the sulky and load up, stop at the yard, unload. Mow and trim and blow, load up, come back home.
  4. kleankutslawn

    kleankutslawn LawnSite Bronze Member
    Messages: 1,185

  5. metro36

    metro36 LawnSite Silver Member
    Messages: 2,417

    What is the black on the deck belt cover for? You did not bolt that lower rack into the engine housing did you? Looks good.
  6. Toy2

    Toy2 LawnSite Bronze Member
    Messages: 1,924

    The black covers the cheap paint that Toro uses.......It starts peeling along the edges of the belt housing and the hold down knobs, at the time I just had rattle-can black and made a triangle/both sides, stopped the rust and hasn't peeled.

    The front bracket is attached to the exhaust bolt, 5 minutes to remove the two pieces if i need to.

  7. gman44

    gman44 LawnSite Member
    Messages: 74

    Were did you find the clamps to hold the trimmer ? I like the set-up
  8. Toy2

    Toy2 LawnSite Bronze Member
    Messages: 1,924

    Clamps are the type 4x4 guys use to hold Hi-lift jacks, shovels, axes, etc....I got them though$12.00 for 2ea.

    They have different sizes.

    I had the metal from a sign I got off the road, welded a plate on it using my HarborFreight cheapy mig welder.....its pretty solid...

    Thanks again!!

Share This Page