my new homemade striper

Discussion in 'Lawn Mowing' started by wacaweed, Apr 26, 2006.

  1. wacaweed

    wacaweed LawnSite Member
    Messages: 86

    tell me what you all think about my new striper I just put on my YES ZTR (I KNOW, I KNOW) LOL but did it for about 25 bucks
  2. wacaweed

    wacaweed LawnSite Member
    Messages: 86

    sorry here ya go

  3. mcwlandscaping

    mcwlandscaping LawnSite Gold Member
    Messages: 3,163

    looks like it would work to me, good job with it!
  4. lawncare18

    lawncare18 LawnSite Senior Member
    Messages: 742

    I need more pictures.. I wana make one to.. how did you attach it ????
  5. LawnGuy73

    LawnGuy73 LawnSite Bronze Member
    Messages: 1,946

    I made the same thing on my Wright Stander, I used an old bed mat for a pickup. They work great. :dancing:
  6. wacaweed

    wacaweed LawnSite Member
    Messages: 86

    I got a piece of angle iron from lowes and a decent heavy metal also from lowes to make 2 Z shaped brakets ( flat metal was bent in a vice then a hole at each end drilled ) then I found a rubber door mat from Big Lots and got 2 of them. And the rest is history. here is another pic. I sure hopes this does the trick ( rain today so hmmm )

  7. LandscapeMasterpieceGA

    LandscapeMasterpieceGA LawnSite Member
    Messages: 109

    if you find you need more weight, you could put a piece of rebar or something across the bottom edge, is it safe for reverse?
  8. chimmygew

    chimmygew LawnSite Senior Member
    Messages: 578

    How well does it work? Looks to thin and flimsy to me.
  9. wacaweed

    wacaweed LawnSite Member
    Messages: 86

    not sure how it works yet, dose anyone have an idea oh how to make it more heavy if it needs it
  10. geogunn

    geogunn LawnSite Gold Member
    from TN
    Messages: 3,010

    I would have used the mower first...before I worried about a strip kit.

    but that is just me. good luck.


Share This Page