My Trucks equipment and work pictures

Discussion in 'Original Pictures Forum' started by Copacabana, Feb 4, 2012.

  1. Schrock Lawns

    Schrock Lawns LawnSite Senior Member
    Messages: 944

    Copacabana I had your number but lost it could you shoot me a text or call me I had a few questions thanks 7574090715
    Posted via Mobile Device
  2. orlawncaresvc

    orlawncaresvc LawnSite Senior Member
    Messages: 962

    Welcome to LawnSite. Those NPRs are off the chain.
  3. Greenstar Services LLC

    Greenstar Services LLC LawnSite Member
    Messages: 1

    Check out the scag. I manage the service department for a repair shop that has stores in 6 states and we have one location in Richmond, I'm just getting back into doing fert work nowadays.
    But hands down I have very few problems out of the Scags we sell. The Toro's and Exmark's are nothing but problem children. too many leak points, a motor that moves up and down with the deck is never good, the front end is too light and bounces too easily. The springs break and changing belts on those--well I hope you have small hands and arms.

    The Scags are bullet proof. biggest discharge chute in the industry largest cutter deck front to back for more vacuum and better cut. the spindles are the same for the v-ride all the way through the turf tiger.Easy lift deck, no bounce on the front end. There's just shy of 150 lbs more metal in the decks of Scags to Toros or Exmarks. one piece split steel pulleys, no riveted or stamped pulleys like T or E. and the blade bolt goes through the spindle top to bottom. No bolts that are screwed into the spindles.

    And if you buy one now Scag is offering a fleet price for V-rides. Saving around 2k depending on set up.

    Check out the scag website and look at how well it stripes right out of the box. You wont be disappointed.
  4. Woodman1

    Woodman1 LawnSite Senior Member
    Messages: 333

    Hey man, glad to hear all is going well! Best of luck!!!
  5. Armsden&Son

    Armsden&Son LawnSite Silver Member
    Messages: 2,358

    Completely agree there greenstar services, I feel the same way about walk behinds.... We used to run a lot of Scag but we had a 36 advantage walk behind, belt driven, this thing was bulletproof... any condition! it cut sooooo good! People say that the belts get wet..... yes, they do, but nothing happens!
  6. TXNSLighting

    TXNSLighting LawnSite Fanatic
    from DFW, TX
    Messages: 6,463

    Just read the whole thread! Very inspiring, and i Love your set up! Makes me want to go mulch!
  7. Copacabana

    Copacabana LawnSite Member
    Messages: 234

    Send me a PM with your question. I'll try to answer as fast as I can.

    Thank you!

    Thanks for the input!

    Thanks again! Same to you.

    Thanks for the input!

    Thank you!
  8. Copacabana

    Copacabana LawnSite Member
    Messages: 234

    I'm working on a few designs between studying and working. It's not easy working full time, studying part-time and being the head of a family full time:dizzy:. Anyways... What do you guys thing about this design. It's the only one I'm not in love with and would like some tips on making it better.

    All help will be appreciated!!!!

    Before .jpg

    Landscape 1.jpg
  9. Kleen Kutz

    Kleen Kutz LawnSite Bronze Member
    from Ama,La
    Messages: 1,613

    Design look nice! What program do you use for the design? Is it real time landscape?
    Posted via Mobile Device
  10. Copacabana

    Copacabana LawnSite Member
    Messages: 234

    Thanks! I use an app on my Ipad, called iScape. Very, very annoying to work with :hammerhead:. For now, I have to use it though!

Share This Page