Lawn Care Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
2,655 Posts
1. Slow down. If you're digging divots you're going too fast.

2. The brekes are probably adjusted way too tight. You should have a little give in them. I mean, you should be able to squeeze them to slow down the mower without them locking up.

3. On the Exmark if you squeze the handle half way after you slow you can pull slightly back on the pivot side as you turn to avoid digging in. It takes some paractice, but you'll get the hang of it.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top