Never sieze

Discussion in 'Lawn Mowing' started by Drew Gemma, Sep 8, 2005.

  1. Drew Gemma

    Drew Gemma LawnSite Bronze Member
    Messages: 1,508

    Do you guys use it? I put it on everything I grew up using it on the farm and now I find myself using it on everything.
  2. lqmustang

    lqmustang LawnSite Senior Member
    Messages: 620

    I use it mostly for steel to aluminum threads, or anything that I think I may want to be sure comes apart again in my lifetime.
  3. dvmcmrhp52

    dvmcmrhp52 LawnSite Platinum Member
    from Pa.
    Messages: 4,205

    Good stuff. Works well on blade bolts and lug nuts.
    All sorts of uses....................
  4. gumper48

    gumper48 LawnSite Member
    Messages: 35

    rodger that-
    i use it on anything taken apart-
    sure comes in handy later on if needed to be taken apart again-
    i use the john deere brand -

  5. Avery

    Avery LawnSite Bronze Member
    Messages: 1,389

    Yep. I use it....
  6. milo

    milo LawnSite Bronze Member
    Messages: 1,308

    yes on blade bolts. if not you can never get them off.
  7. befnme

    befnme LawnSite Bronze Member
    Messages: 1,413

    I learned my lesson by not using it.i had a snap-on commercial impact that wouldn't take a blade nut off on my scag.had to go have it cut off with a torch ,heck heating it up wouldn't even work.
  8. True Cut Lawn Maintenance

    True Cut Lawn Maintenance LawnSite Senior Member
    Messages: 418

    Being a farm boy myself i use it on damn near everything i tighten down, i keep a can in the truck and a can in the shop got mine from the JD dealer
  9. SproulsLawnCare

    SproulsLawnCare LawnSite Senior Member
    from IN
    Messages: 365

    Same as some of you others. I grew up on a farm. Been using never seize on all kinds of stuff ever since. Especially lug nuts, blade bolts, and even on the spark plugs. It helps keep from having to use so much pressure to take them off and lessens the chance of snapping them in half when it does break free!
  10. MBDiagMan

    MBDiagMan LawnSite Senior Member
    Messages: 852

    It is only necessary on applications of dissimilar metals, bolts subject to tightening under use such as blade spindle bolts and where precise torquing is necessary such as head bolts.

    Have a great day,
    ASE Master

Share This Page