New Pro-Stance

Discussion in 'Gravely (Archived)' started by Gravely Commercial, Feb 21, 2012.

  1. NMS0219

    NMS0219 LawnSite Senior Member
    Messages: 616

    Got my new 52 today. All I can say is awesome. Added plus is my old alum. bag fits the new machine.
  2. Kingfish

    Kingfish LawnSite Member
    Messages: 212

    How deep is the deck? Any pics:)
  3. Gravely Commercial

    Gravely Commercial Inactive
    Messages: 346

  4. Kingfish

    Kingfish LawnSite Member
    Messages: 212

  5. NMS0219

    NMS0219 LawnSite Senior Member
    Messages: 616

    Its the same deck as the old 52" except now it has scalp wheels
  6. Gravely Commercial

    Gravely Commercial Inactive
    Messages: 346

    Can you please clarify what you mean by deep? If you are referring to the depth from the top of the deck to the bottom, it is 4.53". If you are looking for a different measurement, please let us know.

  7. McDonald's LC

    McDonald's LC LawnSite Member
    Messages: 7

    does it have the xdz deck.
  8. rufflife00

    rufflife00 LawnSite Member
    Messages: 10

    Is there going to be a 34 inch model.
  9. XYZLawnPros

    XYZLawnPros LawnSite Senior Member
    Messages: 395

    Well Gravely. Seems you have a lot of explaining to do. I realize you have a new model and it is going to have some quirks, but lord almighty you have to be kidding me.

    I walked into just one of my local Gravely dealers with 8k in hand just in case your machine was worth taking home that day.

    #1. Half of the machine sitting on their display floor was covered with oil, hydro fluid and some other weird grease.

    #2 What is this foot operated deck lift you speak of ? There is not one on the 48inch deck machine.

    #3 After fiddling with the pull knob that controls the deck, along with the right side arm lever to pull the deck up and down, I almost ripped my arm off trying to use the deck raising lever. It was definitely not working correctly or was already broke. The sales guy was completely oblivious and knew nothing about the machine.

    #4 The little gold looking bar on the left of the driver station that controls moving the speed bar forward or back was totally whacked out of straight and was almost completely unusable therefore making it impossible to change the speed lever.

    #5 The 2 plastic knobs that loosen to let the operator pad down to access the rear of the machine honestly have to have been engineered by a 3 year old. They were both completely worn down and had already left a mashing/destructive indentations on the beautiful red paint. The plastic knobs are to small, very weak, only a matter of time before you get a million complaints. They were both uneven and smashed into the groove that is supposed to only let the bolt end go through. Really Gravely?

    #6 The outer lip around the bottom of the deck (nose guard/deck edge protector) was so uneven and wavy there were at least 10, 2 inch or so sections
    that the gap between that edge protector was a minimum 1/8 to 3/8 sticking out from the deck itself. Again, looked like a 3 year old bent and welded that piece. REALLY GRAVELY?

    #7 You state on your website a top speed of 9mph. After we got the speed bar actually set farthest forward, using my garmin gps and my cell gps, we got a whoping barely 6mph out of the machine. REALLY REALLY GRAVELY?

    #8 That Kawasaki FX691V engine from the moment he started it up, until I shut it down after a 15 minute inspection ride smoked more blue smoke than the space shuttle challenger. Checked the oil, was within acceptable limits, mechanic checked the filter etc.. seemed fine. What gives Gravely?

    #9 Rode the machine back into the mechanics bay. Shut it off. besides the smoke billowing from the pipe, now the right side caster fork was leaking like a sieve. REALLY REALLY REALLY GRAVELY?

    I was so utterly disgusted with my first initial viewing and had such high expectations, I never even intended to actually drop the deck and cut some grass with it on their front acreage. To worried what the machine may have done to me or the sales guy and mechanic watching if I would have engaged the blades.

    If you respond or anyone else on this site for that matter and try to tell me this is a one off machine that came off the line bad, I'll know your full of absolute bull$hit. My pictures and video I took of that horrendous example of your "New Pro Stance" has a lot to be desired.

    Fastest way to lose a sale and a new customer you ask?
    I think I just summed it up.
  10. Gravely Commercial

    Gravely Commercial Inactive
    Messages: 346


    We sent you a private message and are working to get to the bottom of these issues. We will reply when we get the details of the situation.



Share This Page