New Scag vride with Kohler EFI acting up.....FYI

ed2hess

LawnSite Fanatic
The machine would stumble sometimes usually with PTO on. Turns out the ground wire was not tight at battery. Voltage measured fine battery not running down. Apparently EFI affected in some way.

KIMG1485.JPG


Tested it after tightening ground and it is fine.

KIMG1486.JPG


BTW scag that lever to raise and lower the deck takes tooo much force.
 

Breezmeister

LawnSite Silver Member
Location
South Jersey
The machine would stumble sometimes usually with PTO on. Turns out the ground wire was not tight at battery.

Mmmmm......Loose ground.......o_O

Is that your toughbook or the dealers ?
 

zlandman

LawnSite Bronze Member
Location
Ohio
My buddy bought a wright stander years ago and almost every bolt on the thing was loose leading to all sorts of problems. Couple hours lightening bolts and the problems went away.
 

Top