new tilt trailer, balance point of exmark diesel ztr

Discussion in 'eXmark' started by tomo, Jun 19, 2006.

  1. tomo

    tomo LawnSite Senior Member
    Messages: 660

    Hello, building a new tilt trailer and require info on the front to rear balancepoint of exmark kub diesel 60 inch ztr, older diahatsu 60inch ztr. I am assuming it would be approx 18 inches in front of rear axle.I am using other mowers also and i already now there b/p. I will put all the figures together and average.Incorrect positioning of the axle and tilt mechanism will result in sub par perfomance etc. The trailer only carries one machine at a time. Info from EXMARK would be appreciated. tomo
  2. eXmark

    eXmark Manufacturer / Sponsor
    Messages: 4,258

    Hello tomo,
    The estimate of 18" in front of the rear axle is pretty close. The actual number is about 14-15" in front of the rear axle.
    Thanks Brian
  3. tomo

    tomo LawnSite Senior Member
    Messages: 660

    hello, thanks 4 the response.. tomo

Share This Page