We are thinking of getting another trailer. Most likely just a replacement as we have very little room to store running out of our house as it is. We use a 5x10 tilt now and it is working out fine but would like abit bigger and see examples of nice signage on the trailer. I like the fact of being able to haul brush, leaves, and mulch with the open trailer that is why we are going to have to stay with an open design. I have 2' sides on our tilt now to help hold in product. We are a small company so most equipment has to be dual role. I would love to see some nice ideas on signs for an open trailer. I've seen the signs on the back gate but not seen alot of signage on the sides I guess. All the other guys I talk to tell me they get most of the work they have just off the big enclosed trailer signs. We just have 1 50" ztr but are considering adding a 36" stander. I need a place to mount 3 trimmers, 2 back pack blowers, 1 5 gal. gas, 1 2.5 gal. gas, hedge trimmer and the normal small stuff. We use a full size truck to pull with and normally just leave the hand tools laying in the bed and don't have any racks currently on the trailer, very fast to get to but also could get stolen. Seems like we really don't make very good use of the truck bed much. If we bought all the correct racks for the handhelds it would just be empty most of the time. Any thoughts? We currently are operating under the 10,000 lb. CGVWR with a single axle and 1/2 ton truck as I hear it is a pain to step up to the next level for regulation. Thanks for any feedback.