newbie kiwi

Discussion in 'Introduce Yourself' started by kiwi.beach, May 17, 2018 at 6:25 AM.

  1. kiwi.beach

    kiwi.beach LawnSite Member
    Messages: 4

    new to this site but thought I'd share my design of a lawn striper. I got alot of inspiration from this site and is yet to be tested but used what was lying around to make it up.
    I used some old 5mm thick walled steel pipe and cut down skate board wheels for the roller.
    Springs from a tramp to get more pressure on the roller.
    rubber door Matt attached to and old umbrellas arm.
    and all hung of the rear with he brackets from an old wheel clamp ( colour was close too)

    Will see how it goes when the rain stops here in New Zealand .[​IMG][​IMG][​IMG][​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  2. hort101

    hort101 LawnSite Fanatic
    Male, from S.E. New England
    Messages: 11,037

    Welcome to lawnsite:waving:
    We like kiwi's:D
     
    oqueoque and kiwi.beach like this.
  3. wjjones

    wjjones LawnSite Member
    Messages: 217

    Welcome to LawnSite.
     
    kiwi.beach and hort101 like this.
  4. kiwi.beach

    kiwi.beach LawnSite Member
    Messages: 4

    the result 20180519_150306.jpg
     
    hort101 and wjjones like this.
  5. tommo

    tommo LawnSite Member
    Messages: 9

    good old number eight wire technology at work ..
     
    oqueoque and wjjones like this.
  6. hort101

    hort101 LawnSite Fanatic
    Male, from S.E. New England
    Messages: 11,037

    BeautifulThumbs UpThumbs Up
    First stripes I've seen from Down under
     

Share This Page