Separate names with a comma.
Discussion in 'Lawn Mowing' started by corycc, Apr 20, 2001.
Does anyone make an OCDC for WB's? What about any of you guys? Have you made your own?
I think Stone made one of these for his Toro or at least inquired about it. Check the old posts. Russ
The OCDC that comes on Dixie Choppers should be easily adaptable to just about any mower. It is available from any DC dealer.
The DC OCDC will work even on a WB?
Take a look at the 8th picture down on my DC page on my website, I have a close up of an OCDC and see if you think it will work. DC makes them for different size decks so one should work or you should be able to adapt one of them to fit.
My deck seems to be deeper than you DC. And I have a bagger bracket in the way as well as the discharge chute bracket. Also, the discharge opening curves towards the rear of the opening. I wanted to be able to operate it from behind my WB so I wouldn't have to stop every time I wanted to use it. I will probably design my own.
Why not use your foot?