1. Can’t make it to the GIE+EXPO 2017?
    LawnSite brings the trade show floor to your fingertips with our new GIE+EXPO 2017 Sneak Peek video series debuting now in the Lawn Mowing forum.

    Dismiss Notice

OH GREAT WRIGHT GUY! please divulge more info

Discussion in 'Wright Manufacturing, Inc. (Archived)' started by grassman177, Oct 17, 2010.

  1. grassman177

    grassman177 LawnSite Fanatic
    Messages: 9,795


    so there was a thread on the cutting forum i think about the new stander X.

    wow is all i can say at the limited pics on your site. (by the way, you really do need to update it as the stander is redesigned and you have absolutely nothing about it at all, just the old model)

    we here at lawnsite need WAY more info on this new machine. i mean, it looks so promising to me, finally a RH type without the goofy and awkward narrow frame. I could never figure out what that was all about, just that it was horrible. we are huge stander fans, and currently own 5 of them(have owned 2 more in the past that have been sold and replaced).

    also, i am seeing a new cutter deck, bullnosed and actually square on the trim side( i am not sure about this one as the curved trim side is a very huge atribute to close mowing). i am sure it is nice, but we would like to have more info, and pics of the baffles etc to see what it is made of so to speak!!!!!

    we have been pleased with the cut from the original decks, but they have been a bit outdated and needed to be improved. we dont run them with the added baffles as they mow much better for our conditions without them. I know i am far from the only person you have heard this from. oh they perform, and cut pretty darn nice on newer turf varieties, but old varieties of turf, not so good. anyways, please tell us more, pretty please!!!!!*trucewhiteflag*
  2. Cooter

    Cooter LawnSite Senior Member
    from NE Iowa
    Messages: 510

    I agree, this new model looks sweet. Now, let's hear more about it.
    Posted via Mobile Device
  3. grassman177

    grassman177 LawnSite Fanatic
    Messages: 9,795

    Is anyone listening??????????????????????????????? HELLO
  4. WrightCommercial

    WrightCommercial Inactive
    Messages: 526

    Good Morning Grassman177,

    We are excited about this new machine too! Do you have any specific questions that we can answer? If you've seen our website, you can click on the Stander X info which will provide you with all the specs. I can better provide you with more info if I know what you're specifically interested in.


    Wright Commercial Products
  5. HenryB

    HenryB LawnSite Bronze Member
    Messages: 1,844

    How much is the 61 inch?
  6. WrightCommercial

    WrightCommercial Inactive
    Messages: 526


    Only the 52" is available at this time on the Stander X. Pricing will show up on our website next week. Regarding the deck we encourage you try one as they become available at the dealers. We will let you and others on this site be the judge.

    Best Regards
    Wright Commercial Products
  7. grassman177

    grassman177 LawnSite Fanatic
    Messages: 9,795

    we are 48 deck guys here, so will have to wait till they come out i guess, but are they going to be at GIE? can we at least see a 48 model there or are they literally not made yet?

    i am very intersted in this as opposed to the original RH standers, did not like those at all but love everything about the original standers but RH feature is better than fixed for correct deck pitch at all heights without readjusting the whole machine. the other thing i am very interested in is of course the deck, the old one does a nice job, but with all things improvement can always be made. jsut curious maybe a few descroptions of the deck like depth, major baffling, large discharge???? anything to say help understand more about it. If the deck turns out to be a big hit, would there be plans to change the original fised deck standers to the same deck or not? curious about those things.

    I guess i cant help myself, i love standers and i love machines and innovation. Thanks wright
  8. Jayson_109

    Jayson_109 LawnSite Member
    Messages: 129

    I'd like to know what the "standard" striping kit is? Roller? Can't wait to see this... wonder if we'll get out chance next weekend in Louisville????
  9. pugs

    pugs LawnSite Gold Member
    Messages: 3,024

    Its a rubber flap along the back of the deck. Same thing Ferris is doing on their ICD decks.
  10. olde_blue

    olde_blue LawnSite Senior Member
    Messages: 349

    I'm mainly writing to subscribe to this thread, but. . .

    Did anybody notice that the stars and stripes :usflag: are missing from the upright front on photographs of the Stander X? The flag appears on the "new and improved" fixed deck Stander.

    Maybe the flag was removed to help it sell better outside the US. Probably, though, someone just forgot to stick one on the one photographed.

    The flags on my Stander's peeled off after a couple of years anyhow.


Share This Page