1. Can’t make it to the GIE+EXPO 2017?
    LawnSite brings the trade show floor to your fingertips with our new GIE+EXPO 2017 Sneak Peek video series debuting now in the Lawn Mowing forum.

    Dismiss Notice

Oil weight for Exmark Metro?

Discussion in 'Lawn Mowing' started by yokes, Apr 9, 2005.

  1. yokes

    yokes LawnSite Member
    Messages: 44

    I have a 48" Exmark Metro walk behind with a 15 hp Kawisaki engine with about 200 hours on it. What weight of oil would you recommend that I use?
     
  2. Eddie B

    Eddie B LawnSite Senior Member
    from gone
    Messages: 859

    Use 10W30.
     
  3. lazer 46

    lazer 46 LawnSite Senior Member
    Messages: 521

    I use straight 30 wt. oil in Kawasaki engines.
     
  4. Travis Followell

    Travis Followell LawnSite Silver Member
    from KY
    Messages: 2,206

    You can run 10w-30 or staright 30 weight in it. I prefer straight 30 myself.
     
  5. Cobra Jock

    Cobra Jock LawnSite Member
    Messages: 206

    straight 30 in the middle of the summer! It gets hot and needs this oil weight IMO

    Greg
     
  6. traman

    traman LawnSite Senior Member
    Messages: 712

    look at the dipstick it will tell ya ,most kaw like 30wt but 10w 30 is acceptable
     
  7. Spirit Lanwcare

    Spirit Lanwcare LawnSite Member
    Messages: 86

    Use a good straight 30 weight oil
     
  8. mkwl

    mkwl LawnSite Bronze Member
    Messages: 1,700

    I use Quaker State SAE 10W-30 oil in all of my 4 cycle engines (Including my Kawasaki engines), and I haven't had any problems at all!!! My dealer said it is better to use SAE 10W-30 vs. straight SAE 30.
     

Share This Page