1. Missed the live Ask the Expert event?
    Catch up on the conversation about enhanced efficiency fertilizers with the experts at Koch Turf & Ornamental in the Fertilizer Application forum .

    Dismiss Notice

Our Work and Equipment Thread

Discussion in 'Original Pictures Forum' started by Mikegyver, Jun 14, 2011.

  1. Mikegyver

    Mikegyver LawnSite Bronze Member
    Messages: 1,803

    Thought I would post some pix of work and equipment. Trailer needs to get clean before i post pictures, so just work today.
    [​IMG]
    [​IMG]


    Enjoy! Yep all the edging is done with a trimmer.
    mike
     
  2. Mikegyver

    Mikegyver LawnSite Bronze Member
    Messages: 1,803

    [​IMG]
     
  3. Mikegyver

    Mikegyver LawnSite Bronze Member
    Messages: 1,803

    [​IMG]
     
  4. Mikegyver

    Mikegyver LawnSite Bronze Member
    Messages: 1,803

    [​IMG]
     
  5. Mikegyver

    Mikegyver LawnSite Bronze Member
    Messages: 1,803

    [​IMG]
     
  6. THEGOLDPRO

    THEGOLDPRO LawnSite Fanatic
    Messages: 5,223

    Stripes need some serious work.
     
  7. STIHL GUY

    STIHL GUY LawnSite Fanatic
    from CT
    Messages: 5,226

    the edging looks good
     
  8. Mikegyver

    Mikegyver LawnSite Bronze Member
    Messages: 1,803

    The grass is much different here than in Connecticut. The Commercial is centipede (cannot stripe that) and the others were bahia...a striping kit is not on my monetary radar right now.
    mike
     
  9. THEGOLDPRO

    THEGOLDPRO LawnSite Fanatic
    Messages: 5,223

    reguardless of the striping factor you also don't like to make straight lines, it looks like you mowed it with a garden tractor going in circles.
     
  10. Mikegyver

    Mikegyver LawnSite Bronze Member
    Messages: 1,803

    OK whatever...that was a scag with top of the line blades on it...yes I go around and around...that actually was striped perpendicular to the building...you just cannot see it from that angle. I always go around 1st before i start a pattern. Do it you own way.
    mike
     

Share This Page