1. Trouble Finding PPE, Sanitizer, and Cleaning Supplies?

    How can you get what you need for the safety of your crews? Click here to learn more.

    Dismiss Notice

Peco Pro 3 and Pro 12 DFS Fit All Toro 400, 500 and G3 Series

Discussion in 'Sponsor Announcements' started by PecoVacs, Aug 2, 2011.

  1. PecoVacs

    PecoVacs Inactive
    Messages: 130

    Peco Pro series baggers now fit the 400, 500 and G3 series Toro Z's. Our patented blower system mounts behind the rear wheel, half way between the deck and the container, allowing the most efficient movement of grass and leaves. The deck throws half way, then the blower moves it the rest of the way. This design also eliminates a blower hanging from the deck which ads weight and contributes to deck leveling issues. The PECO system also allows discharging without removal of the blower drive. Just remove the quick release pin and hang the boot on the deck. Turn off the rear mounted blower and start discharging! No components left on your trailer to be stolen! Choose between 5.5 Commercial Briggs or a 6 Kohler. Visit your favorite Toro dealer and ask for PECO.

  2. buttaluv

    buttaluv LawnSite Senior Member
    from MidWest
    Messages: 760

    i'd be interested if you have a unit for a Exmark lazer 60" Ultra cut with a 23 hp Kohler, I'm a little concerened with the small engine that a vaccum system wouldn't work real well.
  3. OP

    PecoVacs Inactive
    Messages: 130

    Just visit www.lawnvac.com, choose the bagger you are interested in and click on "Will it fit my mower?". From here, just use the drop down menu for the features of your mower. If it's not listed, we may not fit it up. Give us a call just in case if you can't find what you are looking for.
  4. CurbGuyNC

    CurbGuyNC LawnSite Member
    from NC
    Messages: 27

    Anything for the 34hp G3 units?
  5. OP

    PecoVacs Inactive
    Messages: 130

    Yes, both the Pro 3 and Pro 12 DFS.
  6. grassman177

    grassman177 LawnSite Fanatic
    Messages: 9,794

    i was always interested in your products if we got a rear bagger instead of the ones that hang off the deck.

    i have heard on here though about some bad experiences with ordering, just curious what was up with that?

    about how much is one of the rear bagger pro 12?
  7. OP

    PecoVacs Inactive
    Messages: 130

    Our blower system is unique in the industry since it is located behind the rear wheel on the discharge side. As mentioned above, this allows easy boot removal to switch from bagging to discharge without removing heavy components. Currently, Kohler has discontinued the 6 HP engine, so only the 5.5 Briggs is available on the Toro G3 series. We have been selling this engine for years and have had very few issues. Currently, the retail price on the Pro 3 is $2450 and $2860 on the Pro 12 DFS, but we will be seeing a price increase on September 1st on many products. At this time, I am not sure if the Pro 3 and Pro 12 will see an increase.

    To address the customer service issues in the past: we are working hard to correct any issues that you may have experienced. In July of 2009, PECO had a change of ownership. This also brought a change in management and the way we do business. So, we have been doing our best to address deficiencies in customer service as well as product. Growing our dealer and distribution network has been a major priority. We feel that your local dealer can service your needs better than we can directly. They know you, the products that you operate and stock parts and Baggers.

    PECO has also been striving to increase the amount of product testing we do on new product as well as product improvements. We make contact with you, our customers to hear feedback both over the phone and in the field.

    If you have any concerns or questions about PECO products please call our office at 1-800-438-5823. We would be happy to speak with you.

    Scott Heseltine

    Sales and Marketing Manager

Share This Page