1. Missed the live Ask the Expert event?
    Catch up on the conversation about enhanced efficiency fertilizers with the experts at Koch Turf & Ornamental in the Fertilizer Application forum .

    Dismiss Notice

Poly questions

Discussion in 'Irrigation' started by PerfiCut L&L, Aug 13, 2010.

  1. Wet_Boots

    Wet_Boots LawnSite Fanatic
    Messages: 48,909

    It worked out surprisingly well for such an afterthought to a system that itself was a rework of an ancient system that contained an "undiscovered zone" that forced the redesign of all the new zones, in order to match the flow of the old zone.
  2. grewup_withsprinklers

    grewup_withsprinklers LawnSite Member
    Messages: 6

    100psi poly tho is not needed. 80 will do fine.
    I use Irrigation 2000 poly pipe and have never had a problem.
    Used to use red stripe poly but switched over 6 years ago to I-2000 , half the price.
    $60 for a 400ft roll of 3/4", $50 for a 300ft roll of 1".
    I use 3/4" poly and just split it with 1" to minimize system costs.
    can run up to 14gpm on 1" and up to 7gpm on the 3/4" without any noticable problems.
  3. greenmonster304

    greenmonster304 LawnSite Gold Member
    Messages: 3,248

    I pay under 50 for 300' of 100 psi
    Posted via Mobile Device
  4. grewup_withsprinklers

    grewup_withsprinklers LawnSite Member
    Messages: 6

  5. irritation

    irritation LawnSite Gold Member
    Messages: 3,333

    36.5312 euros

Share This Page