Poulan 3300 Chainsaw gas/carb problem

Discussion in 'Mechanic and Repair' started by gearstick, Jul 14, 2005.

  1. gearstick

    gearstick LawnSite Member
    Messages: 1

    Gas lines deteriorated(has 2). Which line goes where? One line has "free flow" big screen type filter. The other line has a small porus "brass" type filter that sticks completely into end of line. The carb has 2 fittings, one on the feft side of carb, the other is on top of carb. Which line goes where on carb?
    Saw ran good until gas line split at fitting, when I cleaned air filter.
    But when I "fished" lines out of tank, they broke off due to brittle old age thus leaving me scratching my head on which line and filter connects to which port on Carb. Any help will be appreciated. Thanks.
  2. Lawn Masters

    Lawn Masters LawnSite Senior Member
    Messages: 850

    Replace the lines with new, then try putting them on each fitting, if it runs good, you got it right, if not, try the other way around.

Share This Page