1. Missed the live Ask the Expert event?
    Catch up on the conversation about fertilization strategies for success with the experts at Koch Turf & Ornamental in the Fertilizer Application forum .

    Dismiss Notice

Price for Hardscape Lamppost Please ? ? ?

Discussion in 'Hardscaping' started by Lost Pine, Jun 9, 2007.

  1. Lost Pine

    Lost Pine LawnSite Member
    Messages: 194

    Could someone give me a general price to charge a customer for the LampPost pictured..? I haven't done one in a while and most of my bussiness is Landscaping...?

    LOST PINE

    LAMPPOST.jpg
     
  2. forestfireguy

    forestfireguy LawnSite Senior Member
    from nj
    Messages: 601

    It's tough to say. Are you using that material pictured? If so what is it. If not there is a HUGE variation in pricing between diffrent manufacturers on pillar block. There is a recent post that you might find useful, I forget the title, but you'll understand better if you can find it.
     
  3. Lost Pine

    Lost Pine LawnSite Member
    Messages: 194


    Well. let's go with the Material in the picture. THe customer wants it made out of the same material that his pavers are done with which was put down this Spring....It is Henry material.....
     
  4. Stillwater

    Stillwater LawnSite Platinum Member
    Messages: 4,889

    I am asumeing labor only and the material is already on site and the electrician has already installed the wire and lamp has been purchased and permit is in hand.

    625.00 labor only
     
  5. cgland

    cgland LawnSite Bronze Member
    Messages: 1,929

    Sans electrician I would charge $1,200.00 incuding materials.

    Chris
     
  6. forestfireguy

    forestfireguy LawnSite Senior Member
    from nj
    Messages: 601

    Building a pillar out of pavers? Seems odd. Won't the edges look weird,
     
  7. Stillwater

    Stillwater LawnSite Platinum Member
    Messages: 4,889

    I don't think the edges look weire I think the pillar light in the picture is nice
     
  8. cgland

    cgland LawnSite Bronze Member
    Messages: 1,929

    Those are not pavers, they are 3" Coventry wall.

    Chris
     
  9. Lost Pine

    Lost Pine LawnSite Member
    Messages: 194

    THat's correct ! THe customer wants them made out of Conventry Stone like the rest of his Hardscaping.........

    LOST PINE
     
  10. andrewcarrigan

    andrewcarrigan LawnSite Member
    from alberta
    Messages: 30

    hi there : somthing like that we would charge 1,200-1,500 range good luck
     

Share This Page