1. Can’t make it to the GIE+EXPO 2017?
    LawnSite brings the trade show floor to your fingertips with our new GIE+EXPO 2017 Sneak Peek video series debuting now in the Lawn Mowing forum.

    Dismiss Notice

Q4 Plus mix rate in a Perma Green?

Discussion in 'Pesticide & Herbicide Application' started by upidstay, Jun 29, 2011.

  1. upidstay

    upidstay LawnSite Bronze Member
    from CT
    Messages: 1,554

    What are people mixing Q4 Plus in a Perma Green Triumph tank?

    FERT-TEK LawnSite Bronze Member
    Messages: 1,035

    UPIDSTAY....guys here are going to tear you up alive. You need to provide additional information with questions like this. I will get you started and see if you can figure it out yourself. Please do the math and post it here and we will let you know if you did it right.

    What is the coverage of your PG (hint sq ft covered per tank or galon)? At what rate are you going to apply the Q4 (hint, the label will tell you your rate)?
    Last edited: Jun 29, 2011

    FERT-TEK LawnSite Bronze Member
    Messages: 1,035

    Please clarify what you are looking for adjuvants or solution rates or a cocktail of other products?

    If your question is regarding adjuvants what one are you considering using and what rate do they recommend? I prefer Lovelands, Li700 for most of my applications.
  4. bamaturf

    bamaturf LawnSite Member
    from alabama
    Messages: 136

    1.5 oz per gallon
  5. WestGaPineStraw

    WestGaPineStraw LawnSite Senior Member
    Messages: 765

    I have the triumph...

    Mixing instructions via manual...

    The pg should at .25 gallons per 1000 sq ft. So take your rate of product per 1000 sq ft and multiply by 4, that will give you the rate of product per gallon.

    Btw, you know you have to overlap your last pass by 50% on the triumph.
    Posted via Mobile Device

Share This Page