Redmax spark arrester screen

Discussion in 'Mechanic and Repair' started by MikeKle, Oct 8, 2009.

  1. MikeKle

    MikeKle LawnSite Platinum Member
    Messages: 4,253

    I cannot find the spark arrestor screen on my redmax BCZ26 trimmer? This muffler doesnt open up either. It would be on the muffler outlet side right? I have no idea how Im going to get it out of there once I do find it? Thanks
  2. jeffham

    jeffham LawnSite Member
    Messages: 12

    on my bcz2400, I used a pair of pliars to pull a ring out around th discharge side of the muffler. The arrestor is connected to it. No need to remove the muffler.
  3. ghfire

    ghfire LawnSite Member
    Messages: 97

    What is the purpose of removing the screen
  4. turf and snow

    turf and snow LawnSite Member
    Messages: 79

    the screen gets all gummed up with carbon from unburnt oil and then your trimmer wont run well or at all
  5. ghfire

    ghfire LawnSite Member
    Messages: 97

    Do you suggest removing them and does it void your warrenty
  6. mdlwn1

    mdlwn1 LawnSite Silver Member
    Messages: 2,443

    Just yank it.....its only a legality.
  7. danny17

    danny17 LawnSite Member
    Messages: 36

    needle nose pliers, pull them they will carb up...

    JKOOPERS LawnSite Bronze Member
    Messages: 1,259

    the first thing i do when i buy new 2 cycle equipment is remove the screen.

Share This Page