1. Missed the live Ask the Expert event?
    Catch up on the conversation about fertilization strategies for success with the experts at Koch Turf & Ornamental in the Fertilizer Application forum.

    Dismiss Notice

restorob clutch question

Discussion in 'Mechanic and Repair' started by bobby perez, Jun 22, 2007.

  1. bobby perez

    bobby perez LawnSite Member
    Messages: 86

    I switched the engines and it started up fine and the safeties all work. The problem I'm having is the clutch wont engage.The wires coming from the regulator ,the box mounted on the mower deck,are 2 yellow wires ,a black, and a red with a yellow stripe on it.then they plug into a harness.Now the harness that plugs into the harness with the wires going into the regulator has a yellow wire THATS the one I cut and spliced.I don,t think thats the one I should of cut,because that one connects to the red and yellow striped wire going into the regulator.I cut THAT yellow wire cause there are 2 yellow wires coming out of the regulator, And I did'nt know which one to splice.Obviously Something is different.Also the wires that plug into the clutch harness are 3 BLUE Wires not a black and a blue.AM I confusing you yet. Please help me out here cause I cant make sense of this. THANKS AGAIN.
  2. Restrorob

    Restrorob LawnSite Fanatic
    Messages: 11,029

    You gave it a good try, But......naaa, Check your PM's......
  3. bobby perez

    bobby perez LawnSite Member
    Messages: 86

    I FINALLY GOT IT!!!! Will Give you details later THANK YOU.

Share This Page