Lawn Care Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1,190 Posts
Sorry, good luck with the tach.

To adjust the engine RPM, first make sure your throttle cable is pulling the linkage all the way open. Once you're sure of that, there are 2, 10mm headed bolts that hold down the throttle plate. Loosen those 2 bolts. Slide the plate down to increase RPMs, up to decrease.

Q
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top