Scag Mulch Plate

Discussion in 'Lawn Mowing' started by Jefft, May 4, 2004.

  1. Jefft

    Jefft LawnSite Member
    Messages: 25

    Scag mulch plate anyone know if it is a pain to get off and on?
  2. bugspit

    bugspit LawnSite Senior Member
    Messages: 767

    I had to drill two holes to mount it, both holes exsisted in the mulch plate and the holes drilled were in the mower deck. According to instructions, the corner baffle needs to be removed. Then install the mulch plate.

    One hole goes through the front deck baffle so...if you decide to move the baffle another hole would need drilling.

    I needed to lower my baffle but, instead to drilling a second hole, I drilled an extra one in the mulch plate near the back R/H corner and used two bolts there. Its secure and easy to remove. I also left the corner baffle in.

    hope this makes sense, if not I can shoot some pictures later.

Share This Page