Lawn Care Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter · #1 ·
does anyone have problems with breaking down the scag spindles. When trying to take out the tapered hub, I usually break one of the bolts. Also I would like to buy the top and bottom oil seals at my local auto parts store, but i don't have a part #. I know the scag Part # but they can't interchange that # using the scag part #. Any help would be greatly appreciated. This is on a 48" advantage deck.
 

·
Registered
Joined
·
12,640 Posts
If you take a old seal to a NAPA auto parts store they should be able to cross the number stamped in the seal. If there is no number on the seal most have smart enough employees to measure it and possibly find one.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top