1. Can’t make it to the GIE+EXPO 2017?
    LawnSite brings the trade show floor to your fingertips with our new GIE+EXPO 2017 Sneak Peek video series debuting now in the Lawn Mowing forum.

    Dismiss Notice

Scag TT 27 kawa FD750D

Discussion in 'Lawn Mowing' started by 2rkae, Mar 7, 2012.

  1. 2rkae

    2rkae LawnSite Member
    Messages: 15

    I colud use some help ,started servicing my mower and thought I should change the plugs. The parts store gave me NGK BPR4ES,It had NGK BPR5ES in it and the info I found on th computer said NGK BPR2ES. Is the 2ES a hotter or colder pug. Which plug would you use,and is there any worries with the 5ES being in there for 2 years? Or any long term concerns engine runs good no complaints approx 500 hours no oil consumption just doing maintenance trying to make it last while I make those payments Thanks alot.
    (27 liquid cooled Kawasaki FD750D on scag TT.)
  2. djagusch

    djagusch LawnSite Platinum Member
    from MN
    Messages: 4,350

    I have the 2es in my FD750 on a TT. Thats what the manual says so thats what I run. Can't add to much about your other questions.
  3. 2rkae

    2rkae LawnSite Member
    Messages: 15

    Thanks alot!
  4. Mike Blevins

    Mike Blevins LawnSite Bronze Member
    Messages: 1,390

    I would use what was in it from factory. Also you can call local Scag dealer and they should be able to clear everything up. The 29 Kaw uses the BPR5ES plug. I looked in my owners manual but it nly listed the 29 kaw.

Share This Page