1. Missed the live Ask the Expert event?
    Catch up on the conversation with Ken Hutcheson, President of U.S. Lawns, in the Franchising forum.

    Dismiss Notice


Discussion in 'Mechanic and Repair' started by anj, Jul 27, 2007.

  1. anj

    anj LawnSite Member
    Messages: 167

    How Much Of This Stuff Do You Mix With Your 2cycle Gas? And Will It Work To Clean The Carbon Off The 4mx Vales?
  2. AAELI

    AAELI LawnSite Senior Member
    Messages: 360

    Add to mixed oil/gas according to label directions. Not in place of 2 cycle oil but in addition to the same. Seafoam is good for most everything but brushing your teeth!
  3. topsites

    topsites LawnSite Fanatic
    Messages: 21,653

    If intake is gunked up it's likely due to the use of regular unleaded, which over time likes to leave black or brown deposits.
    It has to do with impurities, these are left behind as the fuel burns.

    I use premium unleaded, not much for putting nobody else's mystery foam or atlantic horse oils in my fuels, premium keeps all my intake related parts squeaky clean, make it a name brand such as BP / Texaco / Shell, maybe Sunoco. If I really want to go nuts on my fuel, I go get a gallon or two of 110 octane leaded racing gasoline, at $6 / gallon I mix a pint of that with 5 gallons premium and it's way cheaper, plus racing fuel is mostly additives anyhow.

    MOW PRO LAWN SERVICE LawnSite Bronze Member
    Messages: 1,568

    Why not mix 2 1/2 gallons of 110 octane two the oil.

Share This Page