Slippery Brick walk way

Discussion in 'Starting a Lawn Care Business' started by Allens LawnCare, Aug 24, 2006.

  1. Allens LawnCare

    Allens LawnCare LawnSite Senior Member
    Messages: 926

    Guys I have a client that wants a brick walkway treated. She has mold or mildew on the bricks that make is very slippery.....Besides powerwashing it, is there anything I can put on it to stop it from coming back
  2. ed2hess

    ed2hess LawnSite Fanatic
    Messages: 14,361

    We use bleach in our are to kill mold..just brush it on let it sit and hoes it off.
  3. Brendan Smith

    Brendan Smith LawnSite Bronze Member
    Messages: 1,195

    i have done this too, as well as using bleach with a pressure washer.
  4. metro36

    metro36 LawnSite Silver Member
    Messages: 2,417

    I have had the best results with this system
    • Put Down Bleach
    • Go out to lunch
    • Come back and pressure wash
    • Retry if needed
    If that doesn't work I don't know what will. I have used that system many times.
  5. westwind

    westwind LawnSite Senior Member
    Messages: 444

    1part bleach 1 part water.

    PMLAWN LawnSite Gold Member
    Messages: 3,534

    Wiil work --BUT--- water down any vegatation close by and maybe even cover it.
  7. ChadsLawn

    ChadsLawn LawnSite Bronze Member
    Messages: 1,110

    Bleach and P/W will be the easiest. I did my mother in laws walk way and man was it bad. I poured bleach on it let it set. Then Brushed it. No way did it even come close to being clean.
    So I poured bleach again let it sit and P/W'ed. Very clean now.

Share This Page