snapper hustler or exmark

Discussion in 'Lawn Mowing' started by grassmasterswilson, May 29, 2008.

  1. grassmasterswilson

    grassmasterswilson LawnSite Platinum Member
    from nc
    Messages: 4,947

    Looking to replace my ztr. currently have a exmark 52" lazer hp and really like the size. I think a 60" may be too big and I may not see much difference as most lawn are residention.

    I have been looking at the snapper s150x, the hustler mini z 52 and the exmark lazer hp and ct.

    Heard good and bad things on all. qestioning the new exmark decks.

    Hope you will help me? help sell me on what to get cause they all seem very similar.
  2. Ridin' Around

    Ridin' Around LawnSite Senior Member
    Messages: 266

    Take a look at the Scag freedom Z as well, available with 52" and Kawi motor.
  3. doubleedge

    doubleedge LawnSite Senior Member
    from ND
    Messages: 911

    The Exmark AS series has a 52" ultracut deck. It is also reasoably priced.
  4. freshprince94

    freshprince94 LawnSite Bronze Member
    Messages: 1,449

    If the ZTR is working fine, why replace it?

    If you have to for some reason, the AS and HP units (they don't have the triton deck) are good 52 units. For a 60", go with the 27 Kohler 60" UltraCut full size Lazer Z.
  5. grassmasterswilson

    grassmasterswilson LawnSite Platinum Member
    from nc
    Messages: 4,947

    1500 hours and I am replacing deck pulleyes once a week. Thinking it may go bad on me. I currently have a lazer hp

    lazer hp 8900
    hustler super z 8400
    snapper 6700

    I have to choose based on dealer and service location and appears I may be leaning towards the hustler.
  6. DaughtryLC

    DaughtryLC LawnSite Senior Member
    Messages: 739

    Go to Johnson's Farm Service!

    VT MOWER LawnSite Member
    from Vermont
    Messages: 38

    The Exmark CT will not hold hills. Fine if you're mowing your own lawn that's flat. That model was made for estate residential use instead of commercial. If you intend to bag, get the 23hp model HP.

Share This Page