1. Missed the live Ask the Expert event?
    Catch up on the conversation about fertilization strategies for success with the experts at Koch Turf & Ornamental in the Fertilizer Application forum.

    Dismiss Notice

Source for belts

Discussion in 'Mechanic and Repair' started by nathannc, Mar 24, 2007.

  1. nathannc

    nathannc LawnSite Senior Member
    Messages: 251

    Where is the best place to buy replacement belts for my 60" Lazer Z? Though it only has 109 hrs on it, the story is that the belt was on wrong when I bought it from an individual when the mower had 99 hrs on it. As a result, the belt was hitting the pivot shaft of the chain tensioner assembly for about 10 hours. Mowing deck seemed to run fine but seemed to slip too easily when running through thick grass. Being new to ZTR mowers, I thought is was normal. I discovered the belt was on wrong while I was putting the belt back on after it jumped off the pulleys. It now has a couple of chunks torn out of it but otherwise intact. The mower runs fine but, I know it is only a matter of time before the belt breaks. Thanks for your suggestions.
  2. MowerMedic77

    MowerMedic77 LawnSite Bronze Member
    Messages: 1,164

Share This Page