Spacer kit question

Discussion in 'Hustler Turf Equip (Archived)' started by jcltyson, Apr 3, 2007.

  1. jcltyson

    jcltyson LawnSite Member
    Messages: 97

    I ordered the (blade) spacer kit to see if the quality of cut would improve on my super z xr7. The kit came in with three (3) spacers, there (3) bolts just under 4 inches long, and three (3) bolts approx. 2 inches long. Logic would say the longer bolts are required with the spacer/blade combination. What are the shorter bolts for?
    Thank you.
  2. mowerconsultant

    mowerconsultant LawnSite Fanatic
    Male, from Syracuse, NY
    Messages: 9,769

    We made a couple different shafts over the years.
    The older version of the shaft did not have the threads recessed up into the shaft, the newer ones do, thus you need the longer bolt.

Share This Page