so this would NOT apply to say a Jungle Jack or an Accelerator catcher....but would apply to blades?

 

so this would NOT apply to say a Jungle Jack or an Accelerator catcher....but would apply to blades?

That's correct sir! Keep in mind, We still have the best prices on Jungle Jacks and Catchers, if you find a better price, let us know, we will match it!

 

Will this speacial be valid of Fluid Film?

 

Will this speacial be valid of Fluid Film?

Fluid Film is covered under the coupon code!

 

Good deal!

 

That's correct sir! Keep in mind, We still have the best prices on Jungle Jacks and Catchers, if you find a better price, let us know, we will match it!

Can't argue that! YOu guys have been 20% cheaper than anybody I've seen on the catchers!!

 

Jungle jacks are 20 bucks off til march 31st 2008 click here
http://www.mowpart.com/jungle-jack-p-347248.html

 

Only one coupon used thus far!!!

I also wanted to advise you guys that you can only use this coupon once during the time alotted. So make sure you order all the parts you need to get 10% discount on all of them!

 

Jungle jacks are 20 bucks off til march 31st 2008 click here
http://www.mowpart.com/jungle-jack-p-347248.html

thanks for pointing this out!

 

Oh, man. I just ordered 500 worth of parts, I wish I saw this.

 

I need the hustler super z fusion blade 795252. do you carry this.

 

I need the hustler super z fusion blade 795252. do you carry this.

I am not showing this blade to be available in Fusion.

 

it came on my 05 hustler super z. it is 20.95 in. long. it is a flat blade. 5/8 center hole.

 

it came on my 05 hustler super z. it is 20.95 in. long. it is a flat blade. 5/8 center hole.

The only fusion blade I am able to find that is 21" with 5/8 hole has a star hole, not round.

 

my dealer has it but it is 19.00 a blade.

 

my dealer has it but it is 19.00 a blade.

Could you get a part number from your dealer? Could be something I am overlooking?

795252 Is not a Oregon Fusion Blade part number, that is the OEM blade. Fusion blades are only available via Oregon.

 

the blades have fusion stamped on the back with 795252 on them.

 

the blades have fusion stamped on the back with 795252 on them.

http://www.mowpart.com/fusion-blade-click-compatibility-list-p-1459.html

This blade shows the same dimensions, however we cannot guarantee it will work. All the dimensions are the same however if you want to give it a go.

You would need to make sure it does not hit upon fitting.

 

I searched it under excel 795252 and oregon blade 92043 is what is cross referenced for that blade. do you have this blade?

 

I searched it under excel 795252 and oregon blade 92043 is what is cross referenced for that blade. do you have this blade?

Yea, I saw that as well. However 92-043 is not a fusion blade, its a regular replacement blade.

 

But yes we do have that blade, I will add it to our list if you would like to purchase it.

 

This ends in a few days guys!!! Get your orders in and get your discount on!

 

I need belt and blades, toro 44" 74171

I also need blades for a skag sw36a-15ka


I'd look these up myself but I guess I need to know the part numbers first? frustrating website for lookups.
I know a good database programmer in royse city if you need one.

 

On the right side of our home page you will see "Parts Lookup by Manufacturer Diagrams" click it! or click here http://www.mowpart.net/parts.asp then click the blue and grey parts look up box in the center of the page. Please read the notation to the left of the blue and grey box before you click it. once you open the parts lookup click the model tab then click the select OEM box and drop it down and select Toro landscape or scag wich ever one your looking for then type in your model number and click search. you will see a list of the same model number. match your serial number up and click the one that matches. Here you will have a complete diagram of the unit in question with part numbers attached. You can even print it if you want? Once you have located the correct part numbers? write them down and go back to the mowpart home page and search them there. If you find toro part number with 0.00 or call for price please call me and Ill fix them quickly. If you still have trouble finding anything please call me at 972-635-7225 from 8 am to 5 pm cst. Mon.-Fri. and ask for Scott.

 

Do you have blades that will cross to Scag 482959? 12" blade with 5/8 hole.