spindles greaseless?

Discussion in 'Lawn Mowing' started by causalitist, May 17, 2007.

  1. causalitist

    causalitist LawnSite Senior Member
    Messages: 610

    just bought brand new toro 48" wb turbo force deck.

    these spindles are greaseless right? cuz im not seeing any zirks.
  2. DaveVB

    DaveVB LawnSite Member
    Messages: 95

    One of the reasons I didn't buy the BadBoy was the greaseless bearings.:nono:
    On my 2006 Toro Z-master the zerks are under the deck pulleys. They put a sticker on the deck pointing the way, and holes in the pulley to facilitate greasing. Then they put one of the spindles on with the zerk pointed the wrong way:confused:
    At the very least check with your dealer.:clapping:
  3. jtrover

    jtrover LawnSite Member
    Messages: 37

    Bad Boys can be ordered with greasable spindles.
  4. topsites

    topsites LawnSite Fanatic
    Messages: 21,652

    Yes, all Toro fixed decks have sealed high speed bearings, I have two 48's.

    The bearings last me anywhere from 1 to 3-4 years or longer, it just depends, weird.
    They cost $50 / set and take anywhere from 2 - 8 hours to replace, depending how many times you've done it before.
  5. Envy Lawn Service

    Envy Lawn Service LawnSite Fanatic
    Messages: 11,087

    The new turbo force units should have zerks.

    They sure sport the new spindle housings, so I don't see why they wouldn't.
  6. Mark in MD

    Mark in MD LawnSite Senior Member
    Messages: 322

    I have mowers with sealed and mowers with zirks. I'd have to say I prefer the sealed spindles. They last as long or longer than the zirk spindles, and I don't have to mess with them.
  7. naturescape

    naturescape LawnSite Bronze Member
    Messages: 1,696

    I agree.........

Share This Page