Stand assembly manual PITA

Discussion in 'Magna-Matic' started by beransfixitinc, Jun 10, 2004.

  1. beransfixitinc

    beransfixitinc LawnSite Senior Member
    Messages: 592

    Man, just got our Lot4 Combo today 6/10/04 and thought I'd put it together tonight. In your redesign of this stand, the instructions being old make it's assembly a Pain In The Ass. First of all, the bottom plate doesn't come assembled, if you DO follow the steps, and put the bottom plate on first, you only waste time, because then you have to take it back OFF because the holes in the mast for the leg pieces are not threaded and you have to put a nut on the inside. Also, the "leg" pieces do not mount with the folded edge shown in the instructions pictures, instead, the angle faces out. So far, with the unexplained differences in the stand assembly, I HOPE there were not any changes to the rest of the parts of the Combo that didn't get an updated instruction manual.
  2. Magna-Matic

    Magna-Matic Sponsor
    Messages: 839


    We understand the instructions for the stand are not adequate, but please do not hesitate to call if you are having any trouble putting it together. We can help you through the assembly.

    The stand was the only item that had any redesign.

    Again, please do call if you have questions, all of our products come with lifetime phone support, and we are glad to help you through any problems due to the unfinished instructions. (The instructions are near completion for publishing, we hope to have them ready in approx one month.)

    Thank you, and we apologize for the inconvienece.

Share This Page