Lawn Care Forum banner
1 - 5 of 5 Posts

· Registered
Joined
·
4,378 Posts
Discussion Starter · #1 · (Edited)
Theres got to be an easier way....
The fuel line and filter were in the bottom of the tank
I removed the carb and tried to pop up the tab that holds the fuel line connectors in the tank. It snapped off.......
How do I get the fuel line back on the barb inside the tank ?

IT AINT NO KOHLER

SLAPPER

Banana Motor vehicle Gas Serveware Ingredient


Wood Gas Engineering Machine Metal


Saw Automotive tire Wood Motor vehicle Automotive lighting
 

· Registered
Joined
·
547 Posts
Pry out that disc inside the depression on the tank, the barb is connected to that.

A little PB (WD40, Liquid Wrench) will do wonders to make it go back in easier.
 

· Registered
Joined
·
4,378 Posts
Discussion Starter · #4 ·
Pry out that disc inside the depression on the tank, the barb is connected to that.

A little PB (WD40, Liquid Wrench) will do wonders to make it go back in easier.
PLAN B

It wouldn't come out so I drilled out the disc and installed Tygon fuel lines.

ITS NOT IN THE BOOK.............NEXT...

Wood Electrical wiring Power tool Gas Tool


Handheld power drill Saw Drill Hammer drill Electrical wiring
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top